Florida 14 Hour CE Package #1

$99.00

This 14 hour package fulfills all state Continuing Education requirements for a 2 year renewal cycle for Florida Plumbers .

  • 6 Hour Florida Required Competency
  • 3 Hour Mastering Isometrics – Simplified
  • 3 Hour International Fuel and Gas Code
  • 1 Hour ADV Thermal & Moisture Protection:  Keeping the Weather Out
  • 1 Hour Plan Reading
Categories: , Tag:

Description

Package Contents

  • 6 Hour Florida Required Competency
  • 3 Hour Mastering Isometrics – Simplified
  • 3 Hour International Fuel and Gas Code
  • 1 Hour ADV Thermal & Moisture Protection:  Keeping the Weather Out
  • 1 Hour Plan Reading

 


Florida Required Competency


COURSE DESCRIPTION

This six-hour internet course fulfills the continuing education requirements outlined by 61G4-18.001 for Workplace Safety, Business Practices (Lien Law), Workers’ Compensation, Construction Laws and Rules, and Wind Mitigation methodologies.  Individual chapter descriptions below outline subjects, topics and subtopics covered.


COURSE OUTLINE

CHAPTER 1 WORKPLACE SAFETY (60 minutes). This one hour chapter describes the most pertinent aspects of jobsite safety regulations. Beginning with OSHA regulations surrounding proper recordkeeping and general first aid and sanitary provisions, the course continues with the fundamental requirements of Personal Protective Equipment, Fall Protection, Tool Safety, Stairway and Ladder Safety, and Excavation requirements. Finally, a comprehensive module on asbestos and lead remediation covers the safe handling of asbestos and lead based materials.                                                                      

Learning Objectives:  1) Describe the causes of the most common workplace injuries 2) Name the Personal Protective Equipment (PPE) most often used to protect workers 3) Describe methods of fall protection available to workers 4) Gain a basic understanding of Lead Remediation. The topics covered are:

A.  Health Regulations and Recordkeeping, Postings, Competent Person.
B.  General Interpretations: Rules, First Aid, Material Safety Data Sheets, Sanitation, Illumination
C.  Personal Protective Equipment, Fire Prevention, Signs, Signals, Barricades, Material Handling
D.  Tools: Hand and Power
E.  Scaffolds
F.  Fall Protection: Systems Criteria and Practices
G.  Excavations, Concrete/Masonry, Steel Erection, Stairs/Ladders

H.  Hazard Communication
I.  Egress and Fire Protection

J.  Asbestos and Lead Safe Handling Practices

CHAPTER 2 WORKERS’ COMPENSATION (60 minutes). Employers in Florida are required by law to pay for the medical treatment and lost wages of employees who are injured on the job or suffer a job-related illness. The underlying principle is that employers must assume the costs of injuries, illnesses and deaths that occur on the job. In Florida, workers’ compensation is regulated by the Department of Financial Services and the Office of the Judges of Compensation Claims and enforced by the Florida Division of Workers’ Compensation. This one-hour chapter describes the rules and responsibilities of employers in complying with Florida Workers’ Compensation laws.

Learning Objectives: 1) Identify the laws and regulations of Florida Workers’ Compensation 2) Understand the process of claim reporting 3) Explain the best ways to manage workers’ compensation costs. The topics covered are:

A.  Workers’ Compensation overview, responsible state entities, four components of WC: medical expenses, disability pay, vocational rehabilitation and benefits to dependents.
B.  Florida Rules and Regulations, postings, key coverage requirements, exemptions, penalties.
C.  Enforcement and Authority, Failure to Comply, Stop Work Orders.
D.  Injury and Illness Reporting, the Benefit Delivery Process and mediation and hearing procedures.
E.  Managing Claims and Costs of WC, workplace safety programs and incentives.
F.  Frequently Asked Questions

CHAPTER 3 FLORIDA CONSTRUCTION STATUTES AND RULES (120 minutes). This two-hour chapter will provide builders with an understanding of the Florida construction statutes and rules as they pertain to the industry. Students will be able to define the powers and duties of the various departments, boards and agencies that make up the Florida Department of Business and Professional Regulation. The rules, penalties and fines surrounding the construction industry are outlined, as are the licensing procedures and requirements. Being familiar with these regulations allows contractors to better operate within the boundaries of the law, and to fulfill their responsibilities to employees, customers and the government. 

Learning Objectives:  1) Define the powers and duties of the Construction Industry Licensing Board 2) Describe the rules, penalties and fines as they pertain to the regulations surrounding the building and construction industry 3) Understand the licensing procedures and requirements for contractors 4) Describe continuing education requirements 5) Explain how complaints/hearings are handled by the State. The topics covered are:

A.  Purpose, Definitions and Exemptions
B.  The Construction Industry Licensing Board: Members, authority, fees and examination.
C.  Qualifications for licensure: Certification, registration, workers’ compensation.
D.  Renewals and continuing education. Inactive and delinquent status.
E.  Business entities and Qualifying agents.
F.  Prohibitions and penalties. Disciplinary proceedings.
G. Homeowner’s Recovery Fund.

CHAPTER 4 FLORIDA LIEN LAW (60 minutes). A lien is a specific legal process that can be used by contractors and others as a lawful remedy for securing payment for labor or materials that have been used to improve another person’s property.  Lien laws are also designed to give protection to laborers and material suppliers in the event of default by the contractor or property owner. Unfortunately, many contractors, subcontractors and material suppliers do not understand the importance of filing the proper documents at the correct time—therefore forfeiting their chances of recovery. This one-hour chapter outlines the documents required, and the order in which they must be submitted in order to protect the claimant’s rights. 

Learning Objectives: 1) Explain how lien laws protect the rights and interests of both the builder and the consumer 2) Define what a lien is, as well as how and when a lien should be filed 3) Understand both owner and contractor time limitations for filing and preserving lien supporting documents and lien rights. The topics covered are:

A.  What is a lien and who is entitled to file?
B.  Notice of Commencement: Who files, when should the NOC be filed? What must be included in the NOC?
C.  Contractor List: What is it? And when must it be furnished, to whom?
D.  Notice to Owner: Who sends the NTO, and what information does it provide?
E.  Contractor Payment Affidavit: What does this document state? When must it be sent, by whom?
F.  Claims of Lien:  What is it?  When must it be filed, and what must it include?
G.  Timelines

H.  Statutes:  713 Part 1

CHAPTER 5 WIND MITIGATION (60 minutes). This one-hour chapter describes wind mitigation methodology, comparing the C-brace system and the X retrofittings. The aftermath of past hurricanes in Florida has shown that one of major damaged structural components in residential homes is the gable-end wall or the gable-end truss for timber wall or masonry wall constructions, respectively. As a result, a revised building code, “Standard for Hurricane Resistant Residential Construction” (SBCCI, 1993, 1999) was developed to require all gable-ends to be designed to resist hurricane force wind. This research investigates two different retrofit systems: (1) X-bracing and (2) C-bracing to determine their structural performance under hurricane wind.       

Learning Objectives: 1) Recognize the need for alternate, lower-cost means to the installation of gable-end bracing 2) Identify new Florida Code requirements that address specific, identified mitigation measures 3) Differentiate between the C-brace system and the X retrofittings. The topics covered are:

A.  Florida Statutes 553.844. Windstorm loss mitigation; requirements for roofs and opening protection.
B.  Investigation abstract, history and purpose.

C.  Methodology, construction of gable end walls, trusses, design
D.  Retrofits:  X-brace and C-brace
E.  Loading and data collection
F.  Results and Conclusions


 Master Plumber Isometrics


Course Description

An isometric sketch is a two dimensional drawing that provides plumbers with the most information about piping layout. Being able to create accurate isometric drawings is a difficult, yet valuable tool for any plumbing professional. This course provides plumbers with plans and drawings that require more advanced skills for laying out complicated isometric drawings. Downloadable drawings are included.


Lesson 1 (30 minutes)

Drawing 1—Drainage Waste and Vent Isometric

  • instructions
  • material lists
  • calculations
  • Table 709.1

Lesson 2 (25 minutes)

Drawing 1—Drainage Waste and Vent Isometric (cont.)

  • measurements
  • pipe sizes
  • fittings

Lesson 3 (30 minutes)

Drawing 2—Multi Story Isometrics

  • sanitary drainage systems
  • traps
  • mains
  • stacks
  • water systems
  • discharge

Lesson 4 (40 minutes)

Drawing 2—Multi Story Isometrics (cont.)

  • fixtures
  • vents
  • branches

Lesson 5 (30 minutes)

Drawing 2—Multi Story Isometrics (cont.)

  • roof drains
  • retention tank
  • water heater

International Fuel and Gas Code


Course Description

The International Fuel Gas Code® (IFGC®) establishes minimum requirements for plumbing systems using prescriptive and performance-related provisions. It is founded on broad-based principles that make possible the use of new materials and new plumbing designs. This course will review the basic provisions for appliance installation, combustion air, venting, fuel gas piping, ducting, ventilation and exhaust. Participants will gain an understanding how these requirements apply to design, plan review and inspection


Chapter 1 Scope and Administration

  • Applicability
  • Permits
  • Inspections
  • Violations

Chapter 2 Definitions

  • Definitions

Chapter 3 General Regulations

  • Structural Safety
  • Appliance Location
  • Combustion, Ventilation and Dilution Air
  • Installation
  • Access and Service Space
  • Condensate Disposal
  • Clearance Reduction
  • Electrical

Chapter 4 Gas Piping Installations

  • Pipe Sizing
  • Piping Materials
  • System Installation
  • Appliance and Manufactured Home Connections
  • Piping Support Intervals
  • Overpressure Protection Devices

Chapter 5 Chimneys and Vents

  • Vents
  • Venting of Appliances
  • Sizing of Category 1 Appliance Venting Systems

Chapter 6 Specific Appliances

  • Forced-Air Warm-Air Furnaces
  • Gas-Fired Toilets
  • Boilers
  • Chimney Damper Opening Area

Chapter 7 Gaseous Hydrogen Systems

  • General Definitions
  • Appendix A – Sizing and Capacities of Gas Piping
  • Appendix B – Sizing of Venting Systems
  • Appendix C – Exit Terminals
  • Appendix D – Safety Inspections

2017 Thermal and Moisture Protection:
Keeping the Weather Out
 

Florida Building Code 6th Edition (2017) Residential
Internet Course
1 Hour Credit
Course #635.2


Course Description

Protecting buildings from the weather and moisture related problems is important for all building professionals.  In areas of high rainfall, and in northern climates, it is even more important that designers, builders, and their subcontractors use “Best Practice” procedures to carefully plan and install thermal and weather resistant components.  This course, based on the 2017 Florida Building codes, pertains to moisture and weather related problems, and will identify practical solutions based on those requirements.  This internet course is intended to provide a minimum of one hour of continuing education to professionals involved in planning, design and construction of structures susceptible to moisture related issues.

METHOD OF PRESENTATION:  This distance learning course is formatted specifically for internet delivery.  Course presentation will require student participation through an assessment.  This method of course presentation assures that student will have direct control of course delivery.

Course material will be presented using multimedia formats, including but not limited to:  static text, photos and illustrations. There are no sound or video clips in this course.  Additionally, participants will have the opportunity to link to related resource websites and applicable articles.  Participants will be able to access instructor support via email (24 hour) and telephone communication (during normal daytime office hours).

After completing this course participants will be able to:

  • Summarize the key elements (either natural or mechanical) of a properly ventilated structure.
  • List and describe at least three specific installation techniques and/or materials that contribute to a properly constructed roof system.
  • Outline at least one design strategy based on “best practices” for the construction of buildings in areas with  high humidity.
  • Identify and implement proven methods that will effectively divert moisture from the foundation of a structure.

COURSE SYLLABUS

Keeping the Weather Out (3 minutes)

1.  Rationale

2.  Performance Objectives

Foundations (6 minutes)

1.  Ensuring a Dry Foundation

a.  Drains
b.  Grading
c.  Dampproofing and Waterproofing
d.  Crawl Spaces
e.  Gutters and Downspouts
f.  Insect Infestation

House Wrap and Underlayment (2 minutes)

1.  Definitions and Types

Corrosion and Decay Resistance (2 minutes)

1.  Recommendations:  Preservative-treated wood and fasteners

The Building Frame (4 minutes)

1. Lumber and Moisture:  Negative Effects

2. Foundation to Wall Transition

Siding (18 minutes)

1. Structural Integrity:  Code

2. Wood Siding

3. Vinyl Siding

4.  Fiber Cement Siding

5.  Lap Siding

6.  Brick Veneer

7.  Exterior Insulation Finishing System and Stucco

Windows and Doors (10 minutes)

1.  Flashing

2.  Caulking

3.  Windows and Installation

4.  Doors and Installation

5.  Skylights

Roofs (11 minutes)

1. Moisture Penetration

2. Weather Protection

3.  Roof Valleys

4.  Flashing

5.  Sheathing and Built up Roofs

6.  Repairs

Ventilation (7 minutes)

1.  Code Requirements

2.  Natural Attic Ventilation

3.  Doing the Job

4.  Installing Rafter Vents

Final Assessment 10 Questions


Plan Reading 1hr

Course Description

The ability to interpret plumbing blueprints and successfully install the required plumbing systems is an essential skill. Prints provide the details you need regarding types and sizes of sinks to the location of gas lines, drains and vents. This video course outlines the general layout of both residential and commercial plans, identifying and detailing schedules, legends, symbols and engineering instructions.


Lesson 1 (20 minutes)

Details of Engineered Prints

  • Commercial plan
  • Overview
  • Legend

Lesson 2 (25 minutes)

Details of Engineered Prints (cont)

  • Plumbing floor plan
  • Symbols and abbreviations
  • Mechanical plan

Lesson 3 (25 minutes)

Details of Engineered Prints (cont)

  • Residential plan

Course instructors will be available by email or telephone between 8am and 6pm Eastern Standard Time. They will assist you with questions regarding course content.

If you have any questions, please call us at 1-800-727-7104 or send an email to info@onlinecti.com. Email responses will usually be returned promptly, but guaranteed within one business day.

Student policies and procedures are always available by going to our website and scrolling to the bottom of the page (See Attendance, Privacy and Refund Policy).