Kentucky 6 Hour CE Package


This 6 hour package fulfills all state Continuing Education requirements for the 1 year renewal cycle for Kentucky Plumbers .

  • 3 Hour Confined Spaces
  • 1 Hour OSHA Safety
  • 1 Hour Plan Reading
  • 1 Hour Plumbing Math
SKU: KY6CE Categories: , Tag:


Package Contents

  • 3 Hour Confined Spaces
  • 1 Hour OSHA Safety
  • 1 Hour Plan Reading
  • 1 Hour Plumbing Math



Confined Spaces 3HR CE


Course Description

29 CFR 1926 – Subpart AA Confined Spaces in Construction sets forth requirements for practices and procedures to protect employees engaged in construction activities at a worksite with one or more confined spaces. Examples of locations where confined spaces may occur include, but are not limited to, the following: Bins; boilers; pits (such as elevator, escalator, pump, valve or other equipment); manholes (such as sewer, storm drain, electrical, communication, or other utility); tanks (such as fuel, chemical, water, or other liquid, solid or gas); incinerators; scrubbers; concrete pier columns; sewers; transformer vaults; heating, ventilation, and air-conditioning (HVAC) ducts; storm drains; water mains; precast concrete and other pre-formed manhole units; drilled shafts; enclosed beams; vessels; digesters; lift stations; cesspools; silos; air receivers; sludge gates; air preheaters; step up transformers; turbines; chillers; bag houses; and/or mixers/reactors.


29 CFR 1926 – Subpart AA
Confined Spaces in Construction

Lesson 1 – 35 minutes

  • 1926.1201 Scope
  • 1926.1202 Definitions

Lesson 2 – 30 minutes

  • 1926.1203 General Requirements

Lesson 3 – 30 minutes

  • 1926.1204 Permit-required Confined Space Program
  • 1926.1205 Permitting Process
  • 1926.1206 Entry Permit

Lesson 4 – 35 minutes

  • 1926.1207 Training
  • 1926.1208 Duties of Authorized Entrants
  • 1926.1209 Duties of Attendants
  • 1926.1210 Duties of Entry Supervisors
  • 1926.1211 Rescue and Emergency Services
  • 1926.1212 Employee Participation
  • 1926.1213 Provision of Documents to Secretary

Final Assessment – 20 minutes

OSHA Safety 1HR CE

Course Description

This one-hour narrated course is a review of the OSHA standards based on 29 CFR 1926 Safety and Health Regulations for the Construction Industry, 29 CFR 1910 Occupational Safety and Health Standards, and 29 CFR 1904 Recording and Reporting Occupational Injuries and Illnesses. These are the current enforceable standards for safety and health of employees in construction activities.

Students will be able to understand and describe the basic components of a construction safety program. They will recognize the hazards inherent at a construction jobsite and describe ways to prevent those hazards. Finally, students will learn the responsibilities of both the employer and the employee in observing established safety practices.

Lesson 1 (20 minutes)

  • OSHA Compliance – General Interpretations
  • PPE
  • Fire Protection
  • Materials Handling

Lesson 2 (20 minutes)

  • Tools
  • Scaffolds
  • Fall Protection

Lesson 3 (20 minutes)

  • Excavation
  • Ladders
  • Stairs
  • Concrete, Steel, Underground
  • Asbestos
  • Lead – RRP, Regulations, Standards and Practices


 PL 1HR Plan Reading CE

Course Description

The ability to interpret plumbing blueprints and successfully install the required plumbing systems is an essential skill. Prints provide the details you need regarding types and sizes of sinks to the location of gas lines, drains and vents. This video course outlines the general layout of both residential and commercial plans, identifying and detailing schedules, legends, symbols and engineering instructions.

At the end of this course participants will be able to:

  • Identify the various symbols included in any residential or commercial blueprint.
  • Gain a broad understanding of the methodology behind successful plan reading.
  • Detail and implement the use of blueprints when bidding and completing a plumbing project.

Lesson 1 Details of Engineered Prints – 17 minutes: This lesson is an introduction to plan reading basics, and how to interpret the general information found on the main page of the print.

  • Commercial plan
  • Overview
  • Legend

Lesson 2 Details of Engineered Prints (cont.) – 25 minutes: This lesson looks at the plumbing pages of the print, information that is specific to the work required of the plumber.

  • Plumbing floor plan
  • Symbols and abbreviations
  • Mechanical plan

Lesson 3 Details of Engineered Prints (cont.) – 25 minutes: This lesson outlines using blueprints for a residential home.

  • Residential plan



Plumbing Math

Course Description

This interactive course will walk you through the basics of plumbing math. Included are practice equations and formulas that you can work on independently. Topics include bend angle conversions, temperature conversions, calculating offsets, pressures and more. Included with the course are downloadable practice exercises and problems to work out independently.

At the end of this course participants will be able to:

  • Gain a thorough understanding of basic math theory
  • Implement math equations and formulas in typical applications

Lesson 1: This lesson is an introduction to basic math calculations and formulas.

  • Overview – 5 minutes
  • Constants – 5 minutes
  • Bend Angles – 5 minutes
  • Application questions – 5 minutes
  • Conversions – 5 minutes
  • Calculating area and volume – 10 minutes

Lesson 2: This lesson works through several problems regarding the topics listed below.

  • Calculating offsets – 10 minutes
  • Calculating offsets using constants – 5 minutes
  • Calculating pressures – 5 minutes
  • Calculating slope and drop – 5 minutes

If you have any questions
Please call us at 1-800-727-7104 | Monday-Friday | 8am-8pm
Or send an email to Email responses will be returned promptly within one business day.

Attendance, Privacy and Refund Policy