New Mexico 16 Hour Journeyman Plumber CE Package

$199.00

This 16 hour package fulfills all state Continuing Education requirements for the 3 year renewal cycle for New Mexico Journeyman Plumbers .

  • 8 Hour Uniform Plumbing Code
  • 6 Hour Lead Paint Awareness
  • 2 Hour Pricing Plumbing for Profit

Description

Package Contents

  • 8 Hour Uniform Plumbing Code
  • 6 Hour Lead Paint Awareness
  • 2 Hour Pricing Plumbing for Profit

 

Uniform Plumbing Code 8HR CE

COURSE SYLLABUS

Course Description

This 8-hour continuing education course is designed to fulfill the code requirement for renewal of New Mexico Journeyman and Master plumbing licenses. Topics include code highlights from the Uniform Plumbing Code, outlined and explained by Master Plumber Lorren Schlotfelt in an easy to follow video format.


​Chapter 1 Administration – 30 minutes

  • Scope
  • Purpose
  • Existing Buildings
  • Additions, Alterations, Renovations and Repairs
  • Building Occupancy
  • Permits and Inspections
  • Violations

Chapter 2 Definitions – 50 minutes

  • Selected Definitions

Chapter 3 General Regulations – 30 minutes

  • Minimum Standards
  • Alternate Materials
  • Unlawful Practices
  • Prohibited Fittings and Practices
  • Independent Systems
  • Thermoplastic Pipe and Fittings

Chapter 4 Plumbing Fixtures and Fixture Fittings – 30 minutes

  • Quality
  • Setting
  • Design and Installation of Plumbing Fixtures
  • Water and Waste Connections
  • Flow Rates
  • Shower Receptors
  • Water Closets
  • Backflow Protection
  • Floor Drains

Chapter 5 Water Heaters – 50 minutes

  • Applicability
  • Other Types
  • Air Infiltration Rate Method
  • Installation
  • Chimneys and Venting
  • Termination
  • Vent Downsizing

Chapter 6 Water Supply and Distribution – 60 minutes

  • Potable/Non-Potable Water
  • Alternate Water Systems
  • Vacuum Breakers/Backflow Prevention
  • Dispensers
  • Materials
  • Fittings
  • Joints
  • Water Pressure
  • Sizing
  • Sprinklers

Chapter 7 Sanitary Drainage – 50 minutes

  • Piping
  • Number of Fixture Units
  • Joints and Connections
  • Cleanouts
  • Building Drains and Sewers

Chapter 8 Indirect Waste – 10 minutes

  • Food and Beverage Establishments
  • Pipe Size and Length
  • Chemical Wastes

Chapter 9 Vents – 30 minutes

  • Siphonage/Back Pressure/Air Circulation
  • Materials
  • Termination
  • Flow Characteristics
  • Wet Venting
  • Combination Waste and Vent Systems
  • Circuit Venting

Chapter 10 Traps and Interceptors – 15 minutes

  • Types
  • Seals/Seal Protection
  • Grease Interceptors

Chapter 11 Storm Drainage – 15 minutes

  • Methods
  • Sumps
  • Drains
  • Secondary Drains
  • Combined Systems
  • Leaders, Conductors and Storm Drains

Appendices – 60 minutes

  • Appendix A Rules for Sizing Water Supply Systems
  • Appendix B Explanatory Notes on Combination Waste and Vent Systems
  • Appendix C Alternate Plumbing Systems
  • Appendix H Private Sewage Disposal Systems
  • Appendix I Installation for PEX Tubing
  • Appendix K Potable Rainwater Catchment Systems
  • Appendix L Sustainable Practices

Lead Paint Awareness


 

Course Description

Traditional renovation work can create significant dust-lead hazards if lead-based paint is disturbed. Contaminated dust generated by traditional renovation work can cause lead poisoning in children, pregnant women, healthy adults, and even pets. Practical changes in work practices can minimize and contain dust. The use of lead-safe work practices makes the job safer and reduces liability exposure. This course will teach you how to perform or supervise lead-safe work practices safely and effectively. This course is not a qualifier for RRP Certification. You must complete an EPA accredited course for Certified Renovator Status.

After completing this course participants will be able to:
 

•   Understand the dangers inherent in lead paint, including the risks and difficulties involved in renovation projects that involve older structures.

•   Summarize the EPA and HUD rules required of Certified Firms and Certified Renovators.

•   Determine if lead-based paint affects your work, and how to educate owners and residents in target housing, or owners and adult representatives in child-occupied facilities about how the work will affect lead in their property, and how to plan the work so that it is lead safe.

•   Outline the process of proper set up so that dust and debris created by the work do not contaminate the property and leave behind lead contaminated dust.

•   Describe how to effectively clean up dust generated by the work performed in the home or child- occupied facility; how Certified Renovators conduct a cleaning verification; and how to dispose of renovation waste.


 

Chapter 1.  Lead Paint Concerns

*Learning Objectives:  1)   Explain what lead-based paint is.  2)  Explain why lead-paint is a problem for renovators. 3)  Describe the health risks of lead to children and adults.  4)  Explain why we are concerned with lead-contaminated dust.

1.  Lead-based Paint

A.  Definition
B.  Health Risks
C.  Exposure Pathways
D.  Clearance Standards

Progress/Check-in Quiz

Chapter 2.  Regulation

*Learning Objectives:  1)  Describe the regulatory requirements that affect renovation work.  2)  Identify EPA and HUD rules.

1.  The RRP Rule

A.  Firm Certification
B.  Individual Certification
C.  Standards

2.  HUD Lead Safe Housing Rule

A.  Safe Practices
B.  Testing
C.  Training

Progress/Check-in Quiz

Chapter 3.  Before Beginning Work

*Learning Objectives:  1)  Educate residents according to the Pre-Renovation Education Rules. 2)  Describe how widespread lead-based paint use was in housing. 3)  Determine if lead-based paint is present.  4) Use EPA-recognized test kits to check for lead-based paint. 5)  Use decision logic charts to decide which rules apply.

1.  Educate Owners and Residents:

A.  Renovate Right Pamphlets
B.  Residential
C.  Child-Occupied Facilities
D.  Common Areas

2.  Determining Lead Paint Presence

A.  Test Kits
B.  Other tests
C.  Decision Logic Charts

Progress/Check-in Quiz

Chapter 4.  Containing Dust 

*Learning Objectives:  1)  Establish containment systems that will keep dust inside of the work area to allow you to clean more efficiently at the end of the day and at completion of the job.   2)  Identify containment requirements for interior renovations.  3)   Identify containment requirements for exterior renovations.

1.  What is Containment?

2.  Interior Containment

A.  Access/Signs
B.  Coverings

C.  Doors/Windows
D.  Entry to work area

3.  Exterior Containment

A.  Work Area
B.  Doors/Windows

Progress/Check-in Quiz

Chapter 5.  During the Work

*Learning Objectives:  1)  Describe work practices prohibited under the RRP Rule because they create dangerous amounts of dust and paint chips.  2)  Identify practices to use to control dust, debris or paint chips. 3)   List tools you will need during the work.  4)  Identify personal protection equipment and procedures.

1.  Prohibited Practices

2.  Specialized Tools

A.  HEPA vacuums

3.  Personal Protection Equipment

4.  Controlling the Dust

A.  Vacuuming the dust
B.  Disposal

Progress/Check-in Quiz

Chapter 6.  Cleaning and Checking Your Work

*Learning Objectives:  1)  Know how to conduct an effective cleaning.   2)  Identify tools needed to conduct cleaning.  3)   State effective techniques to clean up after interior and exterior jobs.   4)  Describe safe disposal practices.  5)  Indicate how to check your work.

1.  Effective Cleanup

A.  Top to Bottom
B.  All Surfaces
C.  Checking your work

2.  Interior Requirements

A. Visual Inspection
B.  Cleaning Verification
C.  Dust Clearance Exam

3.  Exterior Requirements

A.  Sheeting
B.  Disposal

Progress/Check-in Quiz

Chapter 7.  Recordkeeping

*Learning Objectives:  1)  Identify how to keep required records for a job.  2)  Determine what records Certified Renovators and Certified Firm Managers must retain for each job 

1.  On-the-job Records

A.  Documents
B.  Individuals
C.  Common Areas
D.  Child Occupied Facilities

2.  Non-Certified Worker Training

A. Documentation

3.  Sample Reporting

Progress/Check-in Quiz

Chapter 8.  Training

*Learning Objectives:  1)  Describe the roles of a certified renovator.  2)  Describe the roles of trained, non-certified renovation workers.  3)  Indicate the steps for teaching lead safety during renovations using the “Steps to Lead Safe Renovation, Repair and Painting Guide”.

1.  Teaching Lead Safe Practices

A.  Role of the Certified Renovator
B.  Role of Trained non-certified worker

2.  Steps for Teaching

A. Finding Lead
B.  Set up
C.  Personal Protection
D.  Control Dust
E.  Clean up
F.  Control Waste

3.  Documentation

Progress/Check-in Quiz

Appendices

1.  EPA’s Renovation, Repair and Painting Program Final Rule

2.  U.S. Department of Housing and Urban Development (HUD) Requirements
3.  Renovate Right:  Important Lead Hazard Information for Families, Child Care Providers and Schools

4.  Small Entity Compliance Guide to Renovate Right

5.  Steps to LEAD SAFE Renovation, Repair and Painting

6.  Hands-on Exercises

7.  State and Local Regulations

8 .  Regulatory Status of Waste Generated by Contractors and Residents from Lead-based Paint Activities Conducted in Households

9.  For More Information


 

Pricing Plumbing for Profit


Course Description

Stop flushing money! This video course is designed to help anyone who is either thinking of starting up their own plumbing business, or who wants to be confident that they will operate at a profit. In this step-by-step tutorial, you will learn how to accurately account for all your costs, and then apply those costs to an estimate. Running a successful plumbing business requires careful attention to detail by accounting for all costs associated with the business, and charging the customer enough to make a profit. Downloadable worksheets that you can customize to your own business are included!


Cost Workbook – 55 minutes

Page One

  • Employee Costs
  • Office Costs
  • Vehicle Costs
  • Marketing Costs
  • Clothing/Misc. Expenses
  • Training Costs

Page Two

  • Calculations:
    • Hours worked per year
    • Break even rate
    • Profit margins

Estimating Worksheet – 45 minutes

  • Materials
  • Labor

Course instructors will be available by email or telephone between 8am and 6pm Eastern Standard Time. They will assist you with questions regarding course content.

If you have any questions, please call us at 1-800-727-7104 or send an email to info@onlinecti.com. Email responses will usually be returned promptly, but guaranteed within one business day.

Student policies and procedures are always available by going to our website and scrolling to the bottom of the page (See Attendance, Privacy and Refund Policy).