Safety Compliance Suite

$369.00

  • 29 CFR 1926 Confined Spaces – 3 hour
  • Hot Work – 1 hour
  • Silica Safety – 1 hour
  • Respiratory Protection – 1 hour
  • Hazard Communication – 1 hour
  • Fall Protection – 1 hour
  • Personal Protective Equipment – 1 hour
  • Job Safety Analysis- .5 hour
  • Controlling Hazardous Energy – .5 hour
  • Fire Safety – .5 hour
  • Bloodborne Pathogens – .5 hour
  • Tool Box Talks

Hot Work

1 Hour | Online Video Course | Instructor: Nelson Gelinas
This course will focus on the various steps to take to ensure hot work (any activity or precess that creates flames, sparks or heat) is performed in a safe manner.

Silica Safety

1 Hour | Online HD Video Course | Instructor: Scott Corbat and Josh Francis
OSHA estimates that more than 840,000 construction workers are exposed to silica levels exceeding the Permissible Exposure Limit each year.  Learn the OSHA regulations and safety codes for silica safety.

Respiratory Protection

1 Hour | Online Course | Instructor: Nelson Gelinas
This course outlines the types of respirators available, proper fit, and inspection/maintenance requirements.  Compliance with the OSHA Respiratory Protection Standard could avery hundreds of deaths and thousands of illnesses annually.

Hazard Communication

1 Hour | Online Course | Instructor: Nelson Gelinas
This course will outline employee Right-to-Know information, the Global Harmonizing System, Safety Data Sheets, and labels - all necessary information that must be available to employees to ensure chemical safety in the workplace.

Fall Protection

1 Hour | Online Course | Instructor: Nelson Gelinas
Falls are one of the most common types of serious injuries and deaths.  This course outlines the standard equipment use, maintenance and inspection requirements of the equipment and more.

Personal Protective Equipment

1 Hour | Online Course | Instructor: Nelson Gelinas
This course will outline the most common forms of Personal Protective Equipment (commonly referred to as PPE) used in the workplace including gloves, foot and eye protection, hearing devices, hard hats, and more.

Job Safety Analysis

.5 Hour | Online Course | Instructor: Nelson Gelinas
This course outlines the basic steps of a Job Safety Analysis so you can identify hazards before they occur and know how to eliminate or reduce them to an acceptable risk level. 

Fire Safety

.5 Hour | Online Course | Instructor: Nelson Gelinas
This course highlights standards related to fire safety, including prevention, types of fires, extinguishers and best practices.

Bloodborne Pathogens

.5 Hour | Online Course | Instructor: Nelson Gelinas
Bloodborne pathogens are infectious micro organisms in human blood that can cause disease and be easily passed from one person to another.  This course will outline the basic precautions that should be observed in the workplace where accidents can occur.

Controlling Hazardous Energy

.5 Hour | Online Course | Instructor: Nelson Gelinas
This training program covers Lockout/Tagout procedures for the use of devices designed to isolate or disable equipment to prevent causing injury to employees.

Tool Box Talks

Tool Box Talks
This section will give you access to 24 Tool Box Talks

Category:

Description

PACKAGE CONTENTS

  • 29 CFR 1926 Confined Spaces – 3 hour
  • Hot Work – 1 hour
  • Silica Safety – 1 hour
  • Respiratory Protection – 1 hour
  • Hazard Communication – 1 hour
  • Fall Protection – 1 hour
  • Personal Protective Equipment – 1 hour
  • Job Safety Analysis- .5 hour
  • Controlling Hazardous Energy – .5 hour
  • Fire Safety – .5 hour
  • Bloodborne Pathogens – .5 hour
  • Tool Box Talks

 


Confined Spaces 3HR CE


COURSE SYLLABUS

Course Description

29 CFR 1926 – Subpart AA Confined Spaces in Construction sets forth requirements for practices and procedures to protect employees engaged in construction activities at a worksite with one or more confined spaces. Examples of locations where confined spaces may occur include, but are not limited to, the following: Bins; boilers; pits (such as elevator, escalator, pump, valve or other equipment); manholes (such as sewer, storm drain, electrical, communication, or other utility); tanks (such as fuel, chemical, water, or other liquid, solid or gas); incinerators; scrubbers; concrete pier columns; sewers; transformer vaults; heating, ventilation, and air-conditioning (HVAC) ducts; storm drains; water mains; precast concrete and other pre-formed manhole units; drilled shafts; enclosed beams; vessels; digesters; lift stations; cesspools; silos; air receivers; sludge gates; air preheaters; step up transformers; turbines; chillers; bag houses; and/or mixers/reactors.


 

29 CFR 1926 – Subpart AA
Confined Spaces in Construction

Lesson 1 – 35 minutes

  • 1926.1201 Scope
  • 1926.1202 Definitions

Lesson 2 – 30 minutes

  • 1926.1203 General Requirements

Lesson 3 – 30 minutes

  • 1926.1204 Permit-required Confined Space Program
  • 1926.1205 Permitting Process
  • 1926.1206 Entry Permit

Lesson 4 – 35 minutes

  • 1926.1207 Training
  • 1926.1208 Duties of Authorized Entrants
  • 1926.1209 Duties of Attendants
  • 1926.1210 Duties of Entry Supervisors
  • 1926.1211 Rescue and Emergency Services
  • 1926.1212 Employee Participation
  • 1926.1213 Provision of Documents to Secretary

Final Assessment – 20 minutes


Hot Work 1HR CE


COURSE DESCRIPTION

Hot work is any activity or process that creates flames, generates sparks, or heat, and includes welding, grinding, cutting, brazing etc, and any similar applications producing or using sparks, flame or heat. The risk with hot work is high because it introduces a hazard—an ignition source. This course will focus on the various steps to take to ensure hot work is performed in a safe manner.


Hot Work

Lesson 1

  • Hot Work Permit
  • Personal Protective Equipment
    • Hand
    • Foot
    • Clothing
    • Eye and Face
    • Respiratory

Lesson 2

  • Fire Watch
  • Tank Storage
  • Hot Work Area
  • Other Common Hazards
  • Hexavalent Chromium

 


SILICA SAFETY
1HR CE


Course Description

Construction workers are exposed to respirable crystalline silica in over 600,000 workplaces each year. OSHA estimates that more than 840,000 of these workers are exposed to silica levels exceeding the Permissible Exposure Limit (PEL). This one-hour course reviews OSHA regulations and the safety codes surrounding silica safety.

 


 

SILICA SAFETY

Lesson 1

  • Introduction to Silica
  • PEL Limits

Lesson 2

  • Employer Responsibilities
  • Respiratory Protection

Lesson 3

  • Respiratory Protection
  • Exposure Control Methods

 


Respiratory Protection Course

1HR


COURSE SYLLABUS

Course Description

Respirators protect workers against insufficient oxygen environments, harmful dusts, fogs, smokes, mists, gases, vapors, and sprays. These hazards may cause cancer, lung impairment, diseases, or death. Compliance with the OSHA Respiratory Protection Standard could avert hundreds of deaths and thousands of illnesses annually. This course outlines the types of respirators available, proper fit, and inspection/maintenance requirements.

Lesson One

  • Identifying the hazards
  • Training
  • Medical evaluation questionaire
  • Fit testing
    • positive/negative pressure
  • Fit check

Lesson Two

  • Maintenance
  • Proper storage
  • Cartridges/gaskets
  • Types
    • half-face
    • full-face
  • Correct cartridges for toxin
  • Facial hair

 


Hazard Communication 1HR


COURSE SYLLABUS

Course Description

In order to ensure chemical safety in the workplace, information about the identities and hazards of the chemicals must be available and understandable to workers. This course will outline employee Right-to-Know information, the Global Harmonizing System, Safety Data Sheets, and labels.

  • Employee Right-to-Know
  • Global Harmonizing System
    • Pictograms
    • Labels
    • Containers
  • Reading the Label
  • HMIS and NFPA Systems
    • Numbering scale
    • Colors
  • Safety Data Sheets
    • How to Read
    • PEL/STEL
    • Parts of the SDS

Fall Protection Course

1HR


COURSE SYLLABUS

Course Description

Falls are one of the most common types of serious injuries and deaths. Employers are responsible for maintaining a safe working environment, but when fall protection devices are impractical, personal fall protection equipment may be used. This course outlines the standard equipment use, maintenance and inspection requirements for harnesses, lanyards, lifelines, tethers and more.

Lesson One

  • Choosing the right equipment:
    • General Industry
    • Construction Trades
  • Positioning devices, rescue/retrieval devices
  • Harnesses
    • inspect, ANSI
    • proper fit
    • features

Lesson Two

  • Lanyards
    • inspect
    • locks and rivets
    • features
    • Pendulum Effect
  • Anchorage
    • requirements
    • best practices

Lesson Three

  • Rescue plans
    • suspension trauma
    • best practices
    • trauma straps
    • tethers

Personal Protective Equipment Course

1HR


COURSE SYLLABUS

Course Description

Personal protective equipment, commonly referred to as “PPE”, is equipment worn to minimize exposure to a variety of hazards. Examples of PPE include such items as gloves, foot and eye protection, protective hearing devices (earplugs, muffs) hard hats, respirators and full body suits. This course will outline the most common forms of PPE used in the workplace.

Lesson One

  • Purpose
  • Hazard Assessment form
  • Hard Hats
    • ANSI approval Z89 rating
    • class and type
    • accessoriess
  • Eye Protection
    • ANSI Z87 rating
    • types

Lesson Two

  • Hearing Protection
    • ear plugs
    • muffs
  • Foot Protection
    • types
  • Gloves
    • types

Job Safety Analysis


COURSE SYLLABUS

Course Description

A job hazard analysis is a technique that focuses on job tasks as a way to identify hazards before they occur. It focuses on the relationship between the worker, the task, the tools, and the work environment. Ideally, after you identify uncontrolled hazards, you will take steps to eliminate or reduce them to an acceptable risk level. This course outlines the basic steps of a Job Safety Analysis.

1. Job Safety Analysis

  • What is a JSA?
  • Why Have One?
  • Parts of the form
    • Task
    • Hazard
    • Control

Controlling Hazardous Energy Course

.5HR


COURSE SYLLABUS

Course Description

This training program covers Lockout/Tagout procedures for the use of appropriate lockout or tagout devices designed to isolate or disable equipment in order to prevent unexpected start up or release of stored energy, causing injury to employees.

  • Importance of lockout/tagout
  • Employees:
    • Authorized
    • Affected
    • Other
  • Energy sources disabled:
    • Plug boxes
    • Fuse locks
    • Breaker switch locks
    • Valve/pipe donuts or chains
  • Tags
    • Requirements
  • Group lockouts
    • Tags
    • Boxes
  • Stored energy release
  • Account for tools and replace guards

Fire Safety Course

.5 HR


 

COURSE SYLLABUS

Course Description

This course highlights standards related to fire safety, including prevention, types of fires, extinguishers and best practices.

Lesson One

  • Prevention
  • Extinguishers
    • classifications of fire
    • types of extinguishers
    • maintenance and service
    • limitations
  • Operating extinguishers
    • PASS

Bloodborne Pathogens CE
.5 HR


COURSE SYLLABUS

Course Description

Bloodborne pathogens are infectious microorganisms in human blood that can cause disease, and be easily passed from one person to another. This course will outline the basic precautions every person should observe when working in a workplace where accidents can occur.

  • Introduction
  • Other Potentially Infectious Material
  • 5 Primary BBBs
    • Hep A
    • Hep B
    • Hep C
    • AIDS
    • HIV
  • Universal Precautions
  • PPE
  • Clean-Up/Disposal

Tool Box Talks


In this section you will be able to access:

  • 24 Toolbox Talks

 

Course instructors will be available by email or telephone between 8am and 6pm Eastern Standard Time. They will assist you with questions regarding course content.

If you have any questions, please call us at 1-800-727-7104 or send an email to info@onlinecti.com. Email responses will usually be returned promptly, but guaranteed within one business day.

Student policies and procedures are always available by going to our website and scrolling to the bottom of the page (See Attendance, Privacy and Refund Policy).