Bookstore
Order processing typically takes 2-3 business days. You will receive an email with tracking information as soon as the order ships. Books are shipped using Media Mail.
Select Your Books Below
-
Alabama Amendments Code & Rules of Alabama Plumbers & Gas
Alabama state rules and amendments to the International Plumbing Code, for plumbers and gas fitters.
$10.00 -
International Fuel Gas Code 2021 – Alabama
Addresses the design and installation of fuel gas systems and gas-fired appliances through requirements that emphasize performance.
$139.00 -
International Fuel Gas Code 2021 – TABS – Alabama
Approved tabs for the 2021 International Fuel Gas Code.
$7.00 -
International Plumbing Code 2021 – Alabama
The 2021 IPC provides minimum regulations for plumbing facilities and covers new and innovative products, materials, and systems.
$139.00 -
International Plumbing Code 2021 – TABS – Alabama
Approved tabs for the 2021 International Plumbing Code Book.
$7.00 -
Mathematics for Plumbers and Pipefitters, 8th edition 2013 – Alabama
Mathematics for Plumbers and Pipefitters delivers the essential math skills necessary in the plumbing and pipefitting professions.
$200.00 -
Mathematics for Plumbers and Pipefitters, 8th edition 2013 – TABS – Alabama
Approved tabs for Mathematics for Plumbers and Pipefitters, 8th edition 2013
$7.00 -
Modern Plumbing, 8th Edition – Alabama
Modern Plumbing provides information on the design, installation, and service of the different systems found in the field.
$120.00 -
Modern Plumbing, 8th Edition – TABS – Alabama
Approved tabs for Modern Plumbing, 8th Edition
$7.00
-
Uniform Plumbing Code 2018 – Alaska
The UPC 2018 edition represents the most current approach in the plumbing field and provides consumers with safe and sanitary plumbing systems, including new innovations and technologies.
$186.00 -
Uniform Plumbing Code 2018 – TABS – Alaska
Approved tabs for the 2018 Uniform Plumbing Code.
$7.00
-
29 CFR Part 1926 – Code of Federal Regulations – Arizona
Make compliance simple with this book that provides you with a comprehensive set of the most up-to-date Construction regulations.
$53.00 -
29 CFR Part 1926 – Code of Federal Regulations – TABS – Arizona
Approved tabs for the 29 CFR Part 1926 – Code of Federal Regulations
$7.00 -
International Fuel Gas Code 2018 – Arizona
Addresses the design and installation of fuel gas systems and gas-fired appliances through requirements that emphasize performance.
$94.00 -
International Fuel Gas Code 2018 – TABS – Arizona
Approved tabs for the 2018 International Fuel Gas Code.
$7.00 -
International Mechanical Code 2018 – Arizona
Establishes minimum regulations for mechanical systems and covers the use of new materials, methods and design.
$91.00 -
International Mechanical Code 2018 – TABS – Arizona
Approved tabs for the 2018 International Mechanical Code.
$7.00 -
International Plumbing Code 2018 – Arizona
Provides minimum regulations for plumbing facilities and covers new and innovative products, materials, and systems.
$108.00 -
International Plumbing Code 2018 – TABS – Arizona
Approved tabs for the 2018 International Plumbing Code Book.
$7.00
-
International Plumbing Code 2021 – Colorado
The 2021 IPC provides minimum regulations for plumbing facilities and covers new and innovative products, materials, and systems.
$139.00 -
International Plumbing Code 2021 – TABS – Colorado
Approved tabs for the 2021 International Plumbing Code Book.
$7.00 -
International Residential Code 2021 – Colorado
This comprehensive code combines building, plumbing, mechanical, fuel gas, energy, and electrical requirements for one and two family dwellings into a single resource.
$225.00 -
International Residential Code 2021 – TABS – Colorado
Approved tabs for the 2021 International Residential Code.
$7.00
-
29 CFR Part 1926 – Code of Federal Regulations – Connecticut
Make compliance simple with this book that provides you with a comprehensive set of the most up-to-date Construction regulations.
$53.00 -
29 CFR Part 1926 – Code of Federal Regulations – TABS – Connecticut
Approved tabs for the 29 CFR Part 1926 – Code of Federal Regulations
$7.00 -
International Plumbing Code 2021 – Connecticut
The 2021 IPC provides minimum regulations for plumbing facilities and covers new and innovative products, materials, and systems.
$139.00 -
International Plumbing Code 2021 – TABS – Connecticut
Approved tabs for the 2021 International Plumbing Code Book.
$7.00
-
29 CFR Part 1926 – Code of Federal Regulations – Florida
Make compliance simple with this book that provides you with a comprehensive set of the most up-to-date Construction regulations.
$53.00 -
29 CFR Part 1926 – Code of Federal Regulations – TABS – Florida
Approved tabs for the 29 CFR Part 1926 – Code of Federal Regulations
$7.00 -
Chapter 64E-6 Florida Administrative Code
Florida Administrative Code-Chapter 64E-6 with binder.
$26.00 -
Florida Building Code – Accessibility 2023 with tabs
Florida State building code- Accessibility 2023 with tabs.
$112.00 -
Florida Building Code – Fuel Gas 2023 with tabs
Florida State building code- Fuel Gas 2023 with tabs.
$175.00 -
Florida Building Code – Mechanical 2023 with tabs
Florida State building code- Mechanical 2023 with tabs.
$175.00 -
Florida Building Code – Plumbing 2023 with tabs
Florida State building code- Plumbing 2023 with tabs.
$175.00 -
Florida Building Code – Residential 2023 with tabs
Florida State building code- Residential 2023 with tabs.
$255.00 -
Mathematics for Plumbers and Pipefitters, 8th edition 2013 – Florida
Mathematics for Plumbers and Pipefitters delivers the essential math skills necessary in the plumbing and pipefitting professions.
$200.00 -
Mathematics for Plumbers and Pipefitters, 8th edition 2013 – TABS – Florida
Approved tabs for Mathematics for Plumbers and Pipefitters, 8th edition 2013
$7.00 -
NFPA 14 Standards for the Installation of Standpipe and Hose Systems 2019 – Florida
NFPA 14 shows you how to improve fire protection and safety through correct design, installation, inspection, testing and maintenance.
$245.00 -
NFPA 14 Standards for the Installation of Standpipe and Hose Systems 2019 – TABS – Florida
Approved tabs for NFPA 14 Standards for the Installation of Standpipe and Hose Systems 2019
$7.00 -
NFPA 99 Health Care Facilities Chapter 3 & 5 Annex A & C 2021 – Florida
NFPA 99 establishes criteria for health care services based on risk to the patients, staff, or visitors to minimize the hazards of fire, explosion, and electricity.
$223.00 -
NFPA 99 Health Care Facilities Chapter 3; 5 Annex A; C 2021 – TABS – Florida
Approved tabs for NFPA 99 Health Care Facilities Chapter 3 & 5 Annex A & C
$7.00 -
Plumber’s Handbook Revised 5th edition 2018 – Florida
This book explains how to install plumbing systems and is clearly illustrated with diagrams, charts and tables.
$50.00 -
Plumber’s Handbook Revised 5th edition 2018 – TABS – Florida
Approved tabs for Plumber’s Handbook Revised 5th edition 2018
$7.00 -
Solar Thermal Manual Solar Water & Pool Heating Manual 2006 – Florida
Solar Thermal Manual explains all the requirements for design, installation, repair, and maintenance of solar water and pool heating.
$20.00
-
29 CFR Part 1926 – Code of Federal Regulations – Georiga
Make compliance simple with this book that provides you with a comprehensive set of the most up-to-date Construction regulations.
$53.00 -
29 CFR Part 1926 – Code of Federal Regulations – TABS – Georgia
Approved tabs for the 29 CFR Part 1926 – Code of Federal Regulations
$7.00 -
Georgia 2018 Amendments based on the 2018 IPC
Georgia State Amendments to the International Plumbing Code (2018 Edition)
$12.00 -
International Fuel Gas Code 2018 – Georgia
Addresses the design and installation of fuel gas systems and gas-fired appliances through requirements that emphasize performance.
$94.00 -
International Fuel Gas Code 2018 – TABS – Georgia
Approved tabs for the 2018 International Fuel Gas Code.
$7.00 -
International Plumbing Code 2018 – Georgia
Provides minimum regulations for plumbing facilities and covers new and innovative products, materials, and systems.
$108.00 -
International Plumbing Code 2018 – TABS – Georgia
Approved tabs for the 2018 International Plumbing Code Book.
$7.00 -
Mathematics for Plumbers and Pipefitters, 8th edition 2013 – Georgia
Mathematics for Plumbers and Pipefitters delivers the essential math skills necessary in the plumbing and pipefitting professions.
$200.00 -
Mathematics for Plumbers and Pipefitters, 8th edition 2013 – TABS – Georgia
Approved tabs for Mathematics for Plumbers and Pipefitters, 8th edition 2013
$7.00
-
Uniform Plumbing Code 2018 – TABS – Hawaii
Approved tabs for the 2018 Uniform Plumbing Code.
$7.00 -
Uniform Plumbing Code 2018 – Hawaii
The UPC 2018 edition represents the most current approach in the plumbing field and provides consumers with safe and sanitary plumbing systems, including new innovations and technologies.
$186.00 -
International Fuel Gas Code 2018 – TABS – Hawaii
Approved tabs for the 2018 International Fuel Gas Code.
$7.00 -
International Fuel Gas Code 2018 – Hawaii
Addresses the design and installation of fuel gas systems and gas-fired appliances through requirements that emphasize performance.
$94.00 -
29 CFR Part 1926 – Code of Federal Regulations – Hawaii
Make compliance simple with this book that provides you with a comprehensive set of the most up-to-date Construction regulations.
$53.00 -
29 CFR Part 1926 – Code of Federal Regulations – TABS – Hawaii
Approved tabs for the 29 CFR Part 1926 – Code of Federal Regulations
$7.00 -
Mathematics for Plumbers and Pipefitters, 8th edition 2013 – Hawaii
Mathematics for Plumbers and Pipefitters delivers the essential math skills necessary in the plumbing and pipefitting professions.
$200.00 -
Mathematics for Plumbers and Pipefitters, 8th edition 2013 – TABS – Hawaii
Approved tabs for Mathematics for Plumbers and Pipefitters, 8th edition 2013
$7.00
-
2012 Indiana Amendments (675 IAC 16-1.4)$7.00
-
International Plumbing Code 2006 2nd Printing, Indiana Edition 2012
This edition of the IPC has been adopted by Indiana. It provides minimum regulations for plumbing facilities and covers new and innovative products, materials and systems.
$90.00 -
International Plumbing Code 2006 2nd Printing, Indiana Edition 2012 – TABS
Approved tabs for the 2006 2nd Printing, Indiana Edition 2012 International Plumbing Code Book.
$7.00
-
Michigan Plumbing Code 2021
A fully integrated custom code based on the 2021 International Plumbing Code
$153.00 -
Michigan Plumbing Code 2021 – TABS
Approved tabs for the 2021 Michigan Plumbing Code Book.
$7.00 -
Skilled Trades Regulation Act 407 of 2016 – Michigan$15.00
-
Uniform Plumbing Code 2018 – Minnesota
The UPC 2018 edition represents the most current approach in the plumbing field and provides consumers with safe and sanitary plumbing systems, including new innovations and technologies.
$186.00 -
Uniform Plumbing Code 2018 – TABS – Minnesota
Approved tabs for the 2018 Uniform Plumbing Code.
$7.00
-
29 CFR Part 1926 – Code of Federal Regulations – Mississippi
Make compliance simple with this book that provides you with a comprehensive set of the most up-to-date Construction regulations.
$53.00 -
29 CFR Part 1926 – Code of Federal Regulations – TABS – Mississippi
Approved tabs for the 29 CFR Part 1926 – Code of Federal Regulations
$7.00 -
International Plumbing Code 2015 – Mississippi
This book provides minimum regulations for a variety of plumbing facilities, covering design, new products, materials, and systems.
$94.00 -
International Plumbing Code 2015 – TABS – Mississippi
Approved tabs for the 2015Â International Plumbing Code Book.
$7.00 -
International Plumbing Code 2018 – Mississippi
Provides minimum regulations for plumbing facilities and covers new and innovative products, materials, and systems.
$108.00 -
International Plumbing Code 2018 – TABS – Mississippi
Approved tabs for the 2018 International Plumbing Code Book.
$7.00 -
Mathematics for Plumbers and Pipefitters, 8th edition 2013 – Mississippi
Mathematics for Plumbers and Pipefitters delivers the essential math skills necessary in the plumbing and pipefitting professions.
$200.00 -
Mathematics for Plumbers and Pipefitters, 8th edition 2013 – TABS – Mississippi
Approved tabs for Mathematics for Plumbers and Pipefitters, 8th edition 2013
$7.00 -
NASCLA – Contractor’s Guide to Business, Law and Project Management, Mississippi, 4th edition
This book is organized into 3 sections:Â business planning and start up, operating a successful business and, business administration.
$100.00 -
NASCLA – Contractor’s Guide to Business, Law and Project Management, Mississippi, 4th edition – TABS
Approved tabs for the NASCLA – Contractor’s Guide to Business, Law and Project Management, Mississippi, 4th edition
$7.00
-
Uniform Plumbing Code 2018 – North Dakota
The UPC 2018 edition represents the most current approach in the plumbing field and provides consumers with safe and sanitary plumbing systems, including new innovations and technologies.
$186.00 -
Uniform Plumbing Code 2018 – TABS – North Dakota
Approved tabs for the 2018 Uniform Plumbing Code.
$7.00
-
International Plumbing Code 2018 – New Hampshire
Provides minimum regulations for plumbing facilities and covers new and innovative products, materials, and systems.
$108.00 -
International Plumbing Code 2018 – TABS – New Hampshire
Approved tabs for the 2018 International Plumbing Code Book.
$7.00
-
Fuel Gas Code with North Carolina Amendments, 2018 Edition
This is a fully integrated code based on the 2015 International Fuel Gas Code.
$112.00 -
Fuel Gas Code with North Carolina Amendments, 2018 Edition – TABS
Approved tabs for the 2015 Fuel Gas Code with North Carolina amendments.
$7.00 -
NASCLA – Contractor’s Guide to Business, Law and Project Management, North Carolina, 6th edition
This book is organized into 3 sections:Â business planning and start up, operating a successful business and, business administration.
$100.00 -
NASCLA – Contractor’s Guide to Business, Law and Project Management, North Carolina, 6th edition – TABS
Approved tabs for the NASCLA – Contractor’s Guide to Business, Law and Project Management, North Carolina, 6th edition
$7.00 -
North Carolina Administrative Code and Policies 2018 Edition
Includes all of the administrative codes and policies of the 2018 North Carolina State Building Codes.
$71.00 -
North Carolina Administrative Code and Policies 2018 Edition – TABS
Approved tabs for the North Carolina Administration Code and Policies 2018 edition.
$7.00 -
North Carolina Board’s Law and Rules
The Laws and Rules Book contains the General Statutes, Board Rules, and other introductory information about the Board.
$40.00 -
North Carolina State Building Code: Residential Code 2018
This code combines building, plumbing, mechanical, fuel gas, energy, and electrical provisions into a single resource to provide detailed insight.
$162.00 -
North Carolina State Building Code: Residential Code 2018 – TABS
Approved tabs for the 2018 North Carolina State Building Code:Â Residential Code
$7.00 -
Plumbing Code with North Carolina Amendments, 2018 Edition
This is a fully integrated code based on the 2015 International Plumbing Code.
$112.00 -
Plumbing Code with North Carolina Amendments, 2018 Edition – TABS
Approved tabs for the 2015 Plumbing Code with North Carolina amendments.
$7.00
-
Uniform Plumbing Code 2018 – North Dakota
The UPC 2018 edition represents the most current approach in the plumbing field and provides consumers with safe and sanitary plumbing systems, including new innovations and technologies.
$186.00 -
Uniform Plumbing Code 2018 – TABS – North Dakota
Approved tabs for the 2018 Uniform Plumbing Code.
$7.00
-
International Fuel Gas Code 2021 – Ohio
Addresses the design and installation of fuel gas systems and gas-fired appliances through requirements that emphasize performance.
$139.00 -
International Fuel Gas Code 2021 – TABS – Ohio
Approved tabs for the 2021 International Fuel Gas Code.
$7.00 -
International Plumbing Code 2015 – Ohio
This book provides minimum regulations for a variety of plumbing facilities, covering design, new products, materials, and systems.
$94.00 -
International Plumbing Code 2015 – TABS – Ohio
Approved tabs for the 2015Â International Plumbing Code Book.
$7.00 -
Mathematics for Plumbers and Pipefitters, 8th edition 2013 – Ohio
Mathematics for Plumbers and Pipefitters delivers the essential math skills necessary in the plumbing and pipefitting professions.
$200.00 -
Mathematics for Plumbers and Pipefitters, 8th edition 2013 – TABS – Ohio
Approved tabs for Mathematics for Plumbers and Pipefitters, 8th edition 2013
$7.00 -
Modern Plumbing, 9th Edition – Ohio
Modern Plumbing provides information on the design, installation, and service of the different systems found in the field.
$170.00 -
NASCLA – Contractor’s Guide to Business, Law and Project Management, Ohio, 3rd edition
This book is organized into 3 sections:Â business planning and start up, operating a successful business and, business administration.
$100.00 -
NASCLA – Contractor’s Guide to Business, Law and Project Management, Ohio, 3rd edition – TABS
Approved tabs for the NASCLA – Contractor’s Guide to Business, Law and Project Management, Ohio, 3rd edition
$7.00 -
Ohio Plumbing Code 2024
This is a fully integrated code based on the 2021 International Plumbing Code.
$157.00
-
29 CFR Part 1926 – Code of Federal Regulations – Oklahoma
Make compliance simple with this book that provides you with a comprehensive set of the most up-to-date Construction regulations.
$53.00 -
29 CFR Part 1926 – Code of Federal Regulations – TABS – Oklahoma
Approved tabs for the 29 CFR Part 1926 – Code of Federal Regulations
$7.00 -
International Fuel Gas Code 2018 – Oklahoma
Addresses the design and installation of fuel gas systems and gas-fired appliances through requirements that emphasize performance.
$94.00 -
International Fuel Gas Code 2018 – TABS – Oklahoma
Approved tabs for the 2018 International Fuel Gas Code.
$7.00 -
International Plumbing Code 2018 – Oklahoma
Provides minimum regulations for plumbing facilities and covers new and innovative products, materials, and systems.
$108.00 -
International Plumbing Code 2018 – TABS – Oklahoma
Approved tabs for the 2018 International Plumbing Code Book.
$7.00 -
Mathematics for Plumbers and Pipefitters, 8th edition 2013 – Oklahoma
Mathematics for Plumbers and Pipefitters delivers the essential math skills necessary in the plumbing and pipefitting professions.
$200.00 -
Mathematics for Plumbers and Pipefitters, 8th edition 2013 – TABS – Oklahoma
Approved tabs for Mathematics for Plumbers and Pipefitters, 8th edition 2013
$7.00 -
NASCLA – Contractor’s Guide to Business, Law and Project Management, Basic, 13th edition – Oklahoma
This book is organized into 3 sections:Â business planning and start up, operating a successful business and, business administration.
$92.00 -
NASCLA – Contractor’s Guide to Business, Law and Project Management, Basic, 13th edition -TABS – Oklahoma
Approved tabs for the NASCLA – Contractor’s Guide to Business, Law and Project Management, Basic, 13th edition
$7.00 -
Oklahoma Amendments
Oklahoma state codes, statutes, regulations, and amendments for plumbing.
$32.00 -
State of Oklahoma Construction Industries Board Unofficial Administrative Rules
Oklahoma state Construction Industries Board Unofficial Rules
$5.00
-
International Plumbing Code 2018 – Rhode Island
Provides minimum regulations for plumbing facilities and covers new and innovative products, materials, and systems.
$108.00 -
International Plumbing Code 2018 – TABS – Rhode Island
Approved tabs for the 2018 International Plumbing Code Book.
$7.00 -
Rhode Island SBC-3-RI State Amendments
Rhode Island amendments to the 2018 International Plumbing Code.
$8.00
-
29 CFR Part 1926 – Code of Federal Regulations – South Carolina
Make compliance simple with this book that provides you with a comprehensive set of the most up-to-date Construction regulations.
$53.00 -
29 CFR Part 1926 – Code of Federal Regulations – TABS – South Carolina
Approved tabs for the 29 CFR Part 1926 – Code of Federal Regulations
$7.00 -
International Plumbing Code 2021 – South Carolina
The 2021 IPC provides minimum regulations for plumbing facilities and covers new and innovative products, materials, and systems.
$139.00 -
International Plumbing Code 2021 – TABS – South Carolina
Approved tabs for the 2021 International Plumbing Code Book.
$7.00 -
International Residential Code 2018 – South Carolina
This comprehensive code combines building, plumbing, mechanical, fuel gas, energy, and electrical provisions into a single resource.
$168.00 -
International Residential Code 2018 – TABS – South Carolina
Approved tabs for the 2018 International Residential Code.
$7.00 -
Mathematics for Plumbers and Pipefitters, 8th edition 2013 – South Carolina
Mathematics for Plumbers and Pipefitters delivers the essential math skills necessary in the plumbing and pipefitting professions.
$200.00 -
Mathematics for Plumbers and Pipefitters, 8th edition 2013 – TABS – South Carolina
Approved tabs for Mathematics for Plumbers and Pipefitters, 8th edition 2013
$7.00 -
NASCLA – Contractor’s Guide to Business, Law and Project Management, South Carolina Commercial Contractors, 8th edition
This book is organized into 3 sections:Â business planning and start up, operating a successful business and, business administration.
$94.00 -
NASCLA – Contractor’s Guide to Business, Law and Project Management, South Carolina Commercial Contractors, 8th edition – TABS
Approved tabs for the NASCLA – Contractor’s Guide to Business, Law and Project Management, South Carolina Commercial Contractors, 8th edition
$7.00 -
South Carolina Excavator Manual Amendments
South Carolina would like anyone who is involved in excavation to own a copy of this manual which is helpful for interacting with South Carolina 811 (a.k.a. PUPS)
$19.00 -
South Carolina International Fuel Gas Code 2021
This is a fully integrated code based on the 2021 IFGC.
$153.00
-
29 CFR Part 1926 – Code of Federal Regulations – TABS – Tennessee
Approved tabs for the 29 CFR Part 1926 – Code of Federal Regulations
$7.00 -
29 CFR Part 1926 – Code of Federal Regulations – Tennessee
Make compliance simple with this book that provides you with a comprehensive set of the most up-to-date Construction regulations.
$53.00 -
International Fuel Gas Code 2012 – TABS – Tennessee
Approved tabs for the 2012 International Fuel Gas Code.
$7.00 -
International Fuel Gas Code 2012 – Tennessee
Addresses the design and installation of fuel gas systems and gas-fired appliances through requirements that emphasize performance.
$89.00 -
International Plumbing Code 2012 – TABS – Tennessee
Approved tabs for the 2012Â International Plumbing Code Book.
$7.00 -
International Plumbing Code 2012 – Tennessee
This book provides minimum regulations for plumbing facilities and covers new and innovative products, materials and systems.
$89.00 -
International Plumbing Code 2015 – TABS – Tennessee
Approved tabs for the 2015Â International Plumbing Code Book.
$7.00 -
International Plumbing Code 2015 – Tennessee
This book provides minimum regulations for a variety of plumbing facilities, covering design, new products, materials, and systems.
$94.00 -
Mathematics for Plumbers and Pipefitters, 8th edition 2013 – TABS – Tennessee
Approved tabs for Mathematics for Plumbers and Pipefitters, 8th edition 2013
$7.00 -
Mathematics for Plumbers and Pipefitters, 8th edition 2013 – Tennessee
Mathematics for Plumbers and Pipefitters delivers the essential math skills necessary in the plumbing and pipefitting professions.
$200.00
-
Uniform Plumbing Code 2018 – TABS – Texas
Approved tabs for the 2018 Uniform Plumbing Code.
$7.00 -
Uniform Plumbing Code 2018 – Texas
The UPC 2018 edition represents the most current approach in the plumbing field and provides consumers with safe and sanitary plumbing systems, including new innovations and technologies.
$186.00
-
29 CFR Part 1926 – Code of Federal Regulations – TABS – Utah
Approved tabs for the 29 CFR Part 1926 – Code of Federal Regulations
$7.00 -
29 CFR Part 1926 – Code of Federal Regulations – Utah
Make compliance simple with this book that provides you with a comprehensive set of the most up-to-date Construction regulations.
$53.00 -
International Fuel Gas Code 2021 – TABS – Utah
Approved tabs for the 2021 International Fuel Gas Code.
$7.00 -
International Fuel Gas Code 2021 – Utah
Addresses the design and installation of fuel gas systems and gas-fired appliances through requirements that emphasize performance.
$139.00 -
International Mechanical Code 2021 – Utah
Establishes minimum regulations for mechanical systems and covers the use of new materials, methods and design.
$156.00 -
International Plumbing Code 2021 – TABS – Utah
Approved tabs for the 2021 International Plumbing Code Book.
$7.00 -
International Plumbing Code 2021 – Utah
The 2021 IPC provides minimum regulations for plumbing facilities and covers new and innovative products, materials, and systems.
$139.00
-
International Plumbing Code 2021 – TABS – Vermont
Approved tabs for the 2021 International Plumbing Code Book.
$7.00 -
International Plumbing Code 2021 – Vermont
The 2021 IPC provides minimum regulations for plumbing facilities and covers new and innovative products, materials, and systems.
$139.00
-
International Plumbing Code 2018 – TABS – Virginia
Approved tabs for the 2018 International Plumbing Code Book.
$7.00 -
International Plumbing Code 2018 – Virginia
Provides minimum regulations for plumbing facilities and covers new and innovative products, materials, and systems.
$108.00 -
Virginia Board for Contractors, Individual License Cert Regulations$19.00
-
Uniform Plumbing Code 2018 – Washington
The UPC 2018 edition represents the most current approach in the plumbing field and provides consumers with safe and sanitary plumbing systems, including new innovations and technologies.
$186.00 -
Uniform Plumbing Code 2018 – TABS – Washington
Approved tabs for the 2018 Uniform Plumbing Code.
$7.00
-
International Fuel Gas Code 2018 – TABS – West Virginia
Approved tabs for the 2018 International Fuel Gas Code.
$7.00 -
International Fuel Gas Code 2018 – West Virginia
Addresses the design and installation of fuel gas systems and gas-fired appliances through requirements that emphasize performance.
$94.00 -
International Plumbing Code 2018 – TABS – West Virginia
Approved tabs for the 2018 International Plumbing Code Book.
$7.00 -
International Plumbing Code 2018 – West Virginia
Provides minimum regulations for plumbing facilities and covers new and innovative products, materials, and systems.
$108.00 -
Mathematics for Plumbers and Pipefitters, 8th edition 2013 – TABS – West Virginia
Approved tabs for Mathematics for Plumbers and Pipefitters, 8th edition 2013
$7.00 -
Mathematics for Plumbers and Pipefitters, 8th edition 2013 – West Virginia
Mathematics for Plumbers and Pipefitters delivers the essential math skills necessary in the plumbing and pipefitting professions.
$200.00
-
International Plumbing Code 2018 – TABS – Wyoming
Approved tabs for the 2018 International Plumbing Code Book.
$7.00 -
International Plumbing Code 2018 – Wyoming
Provides minimum regulations for plumbing facilities and covers new and innovative products, materials, and systems.
$108.00